MIG 350

• Seperate Wire Feeding System for spools serial welding machine.The wire feed group is located outside the welding machine.
• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
• Compatible with generator.
• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
• ø30 2×1 roll drive system provides good feedability especially with long torches and soft wires such as aluminum and flux cored wires are
conveyed without any deformation.
• The wire feeding speed of the source is adjusted on the separate wire feeding system.
• There is a 2/4 Trigger option.
• ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used
• 220 V AC outlet for CO2 gas heater.
• The machine has ø125 mm diameter wheels, gas cylinder platform and security chain for easy movement in the workshop and field.
• The machine is protected by 2 fuses to minimize electrical and internal parts problems. Internal, power and control installation
of the machine NYA and produced with Busbar system. Thanks to Kodsis, malfunctions that occur can be easily resolved
by reviewing the manual.
• The machine is fan cooled and has thermal protection against overheating.
• Standard accessories come with the machine.